2.5mm/3.2mm | E316L-16 Stainless Steel Stick Electrodes | 2KG

$54.95

3 reviews

E316L-16 electrodes deposit type 316 with a maximum of 0.04% carbon in the weld deposit. The electrode is used for welding type 316L or type 316 stainless steels. E316L-16 is widely used of chemical holding equipment.

Developed for all positions (except vertical down).

2.5mm – suitable current (amp) ranges dependent on positions and thickness of material: 50-80 AMPS.

$54.95

Clear
Clear

3 reviews for 2.5mm/3.2mm | E316L-16 Stainless Steel Stick Electrodes | 2KG

4.7
Based on 3 reviews
5 star
66%
4 star
33%
3 star
0%
2 star
0%
1 star
0%

Customer Images

Image #1 from Ian Merrick
Image #2 from Ian Merrick
Image #3 from Ian Merrick
Image #1 from Ian Merrick

Ian Merrick

The 316L rods had next to no spatter and ran smooth enough they preferred to be run on the high side of the amp range and best of all is the price. The only down side is that they are a bit harder to start.

Was this review helpful to you?
Yes
No
Image #2 from Ian Merrick

Ian Merrick

The 316L rods had next to no spatter and ran smooth enough they preferred to be run on the high side of the amp range and best of all is the price. The only down side is that they are a bit harder to start.

Was this review helpful to you?
Yes
No
Image #3 from Ian Merrick

Ian Merrick

The 316L rods had next to no spatter and ran smooth enough they preferred to be run on the high side of the amp range and best of all is the price. The only down side is that they are a bit harder to start.

Was this review helpful to you?
Yes
No
Image #1 from Ian Merrick
Image #2 from Ian Merrick
Image #3 from Ian Merrick
  1. Wayne Smith (CR Verified Customer)

    Verified reviewVerified review - view originalExternal link

    Was this review helpful to you?
    Yes
    No
  2. Ian Merrick (CR Verified Customer)

    Verified reviewVerified review - view originalExternal link

    The 316L rods had next to no spatter and ran smooth enough they preferred to be run on the high side of the amp range and best of all is the price. The only down side is that they are a bit harder to start.

    Uploaded image(s):

    Image #1 from Ian Merrick
    Image #2 from Ian Merrick
    Image #3 from Ian Merrick
    Was this review helpful to you?
    Yes
    No
  3. William Fowler (CR Verified Customer)

    Verified reviewVerified review - view originalExternal link

    Good gear

    Was this review helpful to you?
    Yes
    No
Add a review

Your email address will not be published. Required fields are marked *

Cancel

Description

Class: E316L-16

AWS: A5.4

Conforms to Certification: AWS A5.4    ASME SFA A5.4

Weld Process: Shielded Manual Metal Arc

AWS Chemical Composition Requirements
C = 0.04 max Si = 0.90 max
Cr = 17.0 – 20.0 P = 0.04 max
Ni = 11.0 – 14.0 S = 0.03 max
Mo = 2.0 – 3.0 Mn = 0.5-2.5
Cu = 0.75 max

Application
E316L-16 electrodes deposit type 316 with a maximum of 0.04% carbon in the weld deposit. The electrode is used for welding type 316L or type 316 stainless steels. E316L-16 is widely used of chemical holding equipment.

Deposited Chemical Composition % (Typical)
C = 0.035 Cr = 18.70 Si = 0.52
Ni = 12.65 Mn = 1.75 P = 0.024
S = 0.022 Mo = 2.30

 

Deposited All Weld Metal Properties %
(Typical) As-Welded
Yield Strength 85,800 psi
Tensile Strength 58,000 psi
Elongation 36%

Deposited Charpy-V-Notch Impact Properties %
Not Applicable

Additional information

Weight N/A
Dimensions N/A
Diameter

2.5mm (50-80 AMPS), 3.2mm (80-110 AMPS)

KG

2KG

3 reviews for 2.5mm/3.2mm | E316L-16 Stainless Steel Stick Electrodes | 2KG

4.7
Based on 3 reviews
5 star
66%
4 star
33%
3 star
0%
2 star
0%
1 star
0%

Customer Images

Image #1 from Ian Merrick
Image #2 from Ian Merrick
Image #3 from Ian Merrick
Image #1 from Ian Merrick

Ian Merrick

The 316L rods had next to no spatter and ran smooth enough they preferred to be run on the high side of the amp range and best of all is the price. The only down side is that they are a bit harder to start.

Was this review helpful to you?
Yes
No
Image #2 from Ian Merrick

Ian Merrick

The 316L rods had next to no spatter and ran smooth enough they preferred to be run on the high side of the amp range and best of all is the price. The only down side is that they are a bit harder to start.

Was this review helpful to you?
Yes
No
Image #3 from Ian Merrick

Ian Merrick

The 316L rods had next to no spatter and ran smooth enough they preferred to be run on the high side of the amp range and best of all is the price. The only down side is that they are a bit harder to start.

Was this review helpful to you?
Yes
No
Image #1 from Ian Merrick
Image #2 from Ian Merrick
Image #3 from Ian Merrick
  1. Wayne Smith (CR Verified Customer)

    Verified reviewVerified review - view originalExternal link

    Was this review helpful to you?
    Yes
    No
  2. Ian Merrick (CR Verified Customer)

    Verified reviewVerified review - view originalExternal link

    The 316L rods had next to no spatter and ran smooth enough they preferred to be run on the high side of the amp range and best of all is the price. The only down side is that they are a bit harder to start.

    Uploaded image(s):

    Image #1 from Ian Merrick
    Image #2 from Ian Merrick
    Image #3 from Ian Merrick
    Was this review helpful to you?
    Yes
    No
  3. William Fowler (CR Verified Customer)

    Verified reviewVerified review - view originalExternal link

    Good gear

    Was this review helpful to you?
    Yes
    No
Add a review

Your email address will not be published. Required fields are marked *

Cancel

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Mail

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Mail

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information: