Description
Recommended Gases:
- Pure Argon.
Conforms to Certification: AWS A5.18 ASME SFA A5.18
Weld Process Used for Tig (GTAW)
AWS Chemical Composition Requirements
C = 0.06 – 0.15
Ni = 0.15 max
Mn = 1.40 – 1.85
Cr = 0.15 max
Si = 0.80 – 1.15
Mo = 0.15 max
P = 0.025 max
V = 0.03 max
S = 0.035 max
Cu = 0.50 max
Deposited Chemical Composition % (Typical)
C = 0.09
P = 0.012
Si = 0.95
Mn = 1.65
S = 0.018
Cu = 0.35
Deposited All Weld Metal Properties % (As Welded)
Tensile Strength
78,000 psi
Yield Strength
65,500 psi
Elongation
24%
Deposited Charpy-V-Notch Impact Properties %
45 ft. lbs. (at -20ºF)
![[ER4043] METER LONG | Aluminium TI...](https://kowelding.com.au/wp-content/uploads/2021/03/4043-long.jpg)
![[ER5356] METER LONG | Aluminium TI...](https://kowelding.com.au/wp-content/uploads/2021/03/5356-1m.jpg)
![[ER308L] METER LONG | Stainless TI...](https://kowelding.com.au/wp-content/uploads/2021/03/308-1m.jpg)
![Mild Steel [ER70S-6] TIG Filler Ro...](https://kowelding.com.au/wp-content/uploads/2020/04/ER70S6-TIG.jpg)
I was using expensive Stainless Steel rods to weld mild steel, and I could not see the point. I am so glad I bought these. They are clean, great to weld with, and although too thick for some of my jobs, perfect for the rest.
I will have to buy some smaller gauge ones now.
good quality
As they always have, Alex and the KO team have smashed it out of the park. So easy to buy what I need in the quantity I need to suit the scale of y business.
Cheers again mate.
Kenny
Delivered Concepts
Townsville, QLD
Look the part (I have not tried them yet, just restocking).